My review of the 4.083 Final Drive Gears
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Springfield, VA
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
My review of the 4.083 Final Drive Gears
Okay so today was a long day, woke up at 6am, got ready by 7am and breakfast and hit the road by 8am with my friend. Arrived at the installation place (SRT in Beltsville, MD) talked to Moe and dropped my car off. This was around 9:15am. Whole day goes by, me and my friend are running around Beltsville all day eating Subway, drinking Robeks and just goofing off. Finally time comes around 5:45pm to finally pick up my car!
So I pay, for anyone wondering it costed me $495.00 only because the bearing on my G35 was really hard to remove and they had to take it to an another shop to get it removed, otherwise it usually runs for about $380.00 dollars to get it installed. Anyways... on to the good stuff..
HOLY F*CK!
The car pulls like no other, I don't know how to explain it -- it really makes the G35 that much more fun to drive, sure the revs are up a little but honestly you're not wasting that much more gas, it's nothing.
The G35 should have came like this stock. The first time I mashed it, I never felt my car lift and just fling me wherever my heart pleases. Like Aceman said... like people with F/I... the smile you get after mashing it, is the same smile I got.
This is also my first "performance" modification on my G, and already I know it is by far the best money I have spent so far. I have no plans on going F/I so these gears really suit me well.
If you have any doubt in your mind about this modification, drop it. There is nothing to worry or yap about -- the G really grew some ***** with this modification.
As you can see, I am very pleased with this as my first modification -- matter of fact I suggest anyone that is planning to stay N/A, get this mod -- and get it FAST.
Thanks to Adam from Z1 for helping me get it quickly, thanks to Aceman for discovering this and sharing this gem with the community and thanks to _jb for helping me throughout all this.
and to end this review... Gentlemen...START YOUR ENGINES!! THE MODDING CRAZE HAS JUST BEGUN!
So I pay, for anyone wondering it costed me $495.00 only because the bearing on my G35 was really hard to remove and they had to take it to an another shop to get it removed, otherwise it usually runs for about $380.00 dollars to get it installed. Anyways... on to the good stuff..
HOLY F*CK!
The car pulls like no other, I don't know how to explain it -- it really makes the G35 that much more fun to drive, sure the revs are up a little but honestly you're not wasting that much more gas, it's nothing.
The G35 should have came like this stock. The first time I mashed it, I never felt my car lift and just fling me wherever my heart pleases. Like Aceman said... like people with F/I... the smile you get after mashing it, is the same smile I got.
This is also my first "performance" modification on my G, and already I know it is by far the best money I have spent so far. I have no plans on going F/I so these gears really suit me well.
If you have any doubt in your mind about this modification, drop it. There is nothing to worry or yap about -- the G really grew some ***** with this modification.
As you can see, I am very pleased with this as my first modification -- matter of fact I suggest anyone that is planning to stay N/A, get this mod -- and get it FAST.
Thanks to Adam from Z1 for helping me get it quickly, thanks to Aceman for discovering this and sharing this gem with the community and thanks to _jb for helping me throughout all this.
and to end this review... Gentlemen...START YOUR ENGINES!! THE MODDING CRAZE HAS JUST BEGUN!
Last edited by L. Baggins; 05-28-2008 at 08:03 PM.
Trending Topics
#9
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
glad you like it!!
savvy - there is a large sticky thread
https://my350z.com/forum/showthread....76#post5811576
that answers every possible question one could ever have about the gears
savvy - there is a large sticky thread
https://my350z.com/forum/showthread....76#post5811576
that answers every possible question one could ever have about the gears
#10
Registered User
iTrader: (1)
Join Date: Nov 2005
Location: Salem, New Hampshire
Posts: 4,124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Z1 Performance
glad you like it!!
savvy - there is a large sticky thread
https://my350z.com/forum/showthread....76#post5811576
that answers every possible question one could ever have about the gears
savvy - there is a large sticky thread
https://my350z.com/forum/showthread....76#post5811576
that answers every possible question one could ever have about the gears
nice, thanks
#13
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Springfield, VA
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hunter6
I'm in MD and looking for a good shop to do gears. I've not heard of SRT yet...more info?
Thanks
Thanks
Ask for Moe!
#14
Registered User
iTrader: (1)
Join Date: Nov 2005
Location: Salem, New Hampshire
Posts: 4,124
Likes: 0
Received 0 Likes
on
0 Posts
ughhh i checked out the big sticky thread looking for an answer to the 80mph cruise RPM speed question and the damn thing is over 20 pages long. Any chance i can get a quick answer to that on here and save me an hour?
#15
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Springfield, VA
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by savvy
ughhh i checked out the big sticky thread looking for an answer to the 80mph cruise RPM speed question and the damn thing is over 20 pages long. Any chance i can get a quick answer to that on here and save me an hour?
So if you're going 80-81, you will be hovering on 3300rpms.
And boy do I love it! The power in every gear is freaking incredible. Driving home from work even cruising in 6th, when I want to mash it, the car picks up EASILY! No need for any fast and furious downshifts.
#20
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Springfield, VA
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sq40
Final Drive Gears are the best bang-for-the-buck upgrade for Zs/Gs on the market. Period.
Originally Posted by savvy
oh wow that isn't a big bump at all on the highway cruising RPM....this sounds awesome.
Originally Posted by savvy
this sounds awesome.
Originally Posted by 3kgtslflip
Damn, really makes me want this. How much did you pay for the parts?
Depending on your mileage, you have to get the installation kit that coordinates with your mileage. Adam from Z1 will take care of you, he did for me.
Last edited by L. Baggins; 05-30-2008 at 07:46 AM.