Notices
Northern California San Francisco, Oakland, Sacramento, San Jose, Pleasanton, etc.

Went to Z car and found out the truth....

Thread Tools
 
Search this Thread
 
Old 10-09-2006, 06:52 PM
  #1  
bigbri
Registered User
Thread Starter
 
bigbri's Avatar
 
Join Date: Apr 2005
Location: CALI
Posts: 2,059
Likes: 0
Received 0 Likes on 0 Posts
Default Went to Z car and found out the truth....

We'll as we all know I've had all my Z work done at SP and am very happy with my car..But as everyone knows Sp's dyno reads high and I had no clue on my dyno numbers I was told "low 700 high 600 WHEEL HP" I tursted the person that built my car and was happy the way it ran..Well a coulple of weeks ago my car felt differrent and my car was running different...Like the tune changed on me...Then I couldn't rev the motor past 3500rpms due to limp mode because my flywheel was coming apart and setting off a check enging code of crank angle sensor...So I took my car to z car to get the clutch and flywheel changed so I could drive my car normal again and decided to see "the real #'s" I know my car is fast and never thought it had 700whp but guesstamated low 600whp....The highest I trapped was 134mph on a cold night boosting 23lbs witch is a good indication of low to mid 600whp..Well it was a warm day and we dynoed my car...Ready for the numbers???...........570whp and 540wtq In my cars defense it was hot, my a/f is FUKING rich 10.1 to 8.1 and the car was only boosting 18lbs boost as opposed to the 23lbs it boosts on the street.......Anyways I just wanted you all to know..Also ZCAR GARAGE is the BEST shop I've ever been to Rob is a cool *** guy and the Guys working on the cars are baddass and know there ****...The first time I every met Rob he gives me one of his own personal cars for a "loaner" car to drive back up to sac while my car was being worked on.... I wish I would of gone there from the start....So anyone with Z needs around NOR CAL go to Z car garage.....I have some plans for my z and have about 100+ more wheel hp coming soon....

Last edited by bigbri; 10-10-2006 at 10:43 AM.
Old 10-09-2006, 07:03 PM
  #2  
SAC350Z
Registered User
iTrader: (3)
 
SAC350Z's Avatar
 
Join Date: Nov 2005
Location: Norcal
Posts: 99
Likes: 0
Received 0 Likes on 0 Posts
Default

+1 On Rob. I met him at the raceway before..A really cool dude..Knows his stuff. I'd recommend his shop over anyones.
Old 10-09-2006, 07:15 PM
  #3  
Nitrouz
Back to Z
iTrader: (27)
 
Nitrouz's Avatar
 
Join Date: Dec 2004
Location: West Coast
Posts: 6,626
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by bigbri
We'll as we all know I've had all my Z work done at SP and am very happy with my car..But as everyone knows Sp's dyno reads high and I had no clue on my dyno numbers I was told "low 700 high 600 WHEEL HP" I tursted the person that built my car and was happy the way it ran..Well a coulple of weeks ago my car felt differrent and my car was running different...Like the tune changed on me...Then I couldn't rev the motor past 3500rpms due to limp mode because my flywheel was coming apart and setting off a check enging code of crank angle sensor...So I took my car to z car to get the clutch and flywheel changed so I could drive my car normal again and decided to see "the real #'s" I know my car is fast and never thought it had 700whp but guesstamated low 600whp....The highest I trapped was 134mph on a cold night boosting 23lbs witch is a good indication of low to mid 600whp..Well it was a warm day and we dynoed my car...Ready for the numbers???...........570whp and 540wtq In my cars defense it was hot, my a/f is FUKING rich 10.1 to 8.1 and the car was only boosting 18lbs boost as opposed to the 23lbs it boosts on the street...BUT THIS IS NO EXCUSE I'M FUKING PISSED THAT I WAS LIED TO AND AM GLAD THAT FING SHOP WENT UNDER....Anyways I just wanted you all to know..Also ZCAR GARAGE is the BEST shop I've ever been to Rob is a cool *** guy and the Guys working on the cars are baddass and know there ****...The first time I every met Rob he gives me one of his own personal cars for a "loaner" car to drive back up to sac while my car was being worked on.... I wish I would of gone there from the start....So anyone with Z needs around NOR CAL go to Z car garage.....I have some plans for my z and have about 100+ more wheel hp coming soon....
sorry to hear bro. But as I've told you...it's just numbers. As long as you get the RIGHT numbers and more importantly, YOU are happy with how the car RUNS. I'm sure you have that now.

What's Zcargarage? Do they build anything "crazy"?
Old 10-09-2006, 07:26 PM
  #4  
Ghost 350z
Registered User
iTrader: (15)
 
Ghost 350z's Avatar
 
Join Date: Jun 2006
Location: Get out my way pimpin', FL
Posts: 8,269
Likes: 0
Received 2 Likes on 2 Posts
Default

I thought you were selling it?
Old 10-09-2006, 07:28 PM
  #5  
bigbri
Registered User
Thread Starter
 
bigbri's Avatar
 
Join Date: Apr 2005
Location: CALI
Posts: 2,059
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Diesel350z
I thought you were selling it?
I was..I may build it to beat ALEX....
Old 10-09-2006, 07:31 PM
  #6  
Nitrouz
Back to Z
iTrader: (27)
 
Nitrouz's Avatar
 
Join Date: Dec 2004
Location: West Coast
Posts: 6,626
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by bigbri
I was..I may build it to beat ALEX....
Old 10-09-2006, 08:26 PM
  #7  
Changvi
New Member
iTrader: (66)
 
Changvi's Avatar
 
Join Date: Mar 2006
Location: Somewhere
Posts: 3,453
Received 1 Like on 1 Post
Default

Maybe thinking about supercharging soon. Definitely will go back to rob for the job. Kudos to Zcar..
Old 10-09-2006, 08:42 PM
  #8  
atar350
Registered User
 
atar350's Avatar
 
Join Date: Jan 2005
Location: Sactown, California
Posts: 2,331
Likes: 0
Received 0 Likes on 0 Posts
Default

What flywheel/clutch did you have, and what do you have now? I wish you could have done a dyno run on 23lbs....taking out modded z06's on only 18lbs is still crazy...lol.
Old 10-10-2006, 11:00 AM
  #9  
LOU
Registered User
iTrader: (2)
 
LOU's Avatar
 
Join Date: Feb 2004
Location: NOR*CAL
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

I got something for the both of you... once it's done of course.

Originally Posted by bigbri
I was..I may build it to beat ALEX....
Old 10-10-2006, 03:12 PM
  #10  
Nitrouz
Back to Z
iTrader: (27)
 
Nitrouz's Avatar
 
Join Date: Dec 2004
Location: West Coast
Posts: 6,626
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by LOU
I got something for the both of you... once it's done of course.
We don't welcome supra guys here.
Old 10-10-2006, 03:27 PM
  #11  
LOU
Registered User
iTrader: (2)
 
LOU's Avatar
 
Join Date: Feb 2004
Location: NOR*CAL
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Nitrouz
We don't welcome supra guys here.
Old 10-10-2006, 03:30 PM
  #12  
diwun67
Registered User
iTrader: (13)
 
diwun67's Avatar
 
Join Date: Jun 2005
Location: In the wrong lane
Posts: 6,433
Likes: 0
Received 0 Likes on 0 Posts
Default

I know I'm a nobody and all but who is this Alex and what does he drive?
Old 10-10-2006, 03:42 PM
  #13  
LOU
Registered User
iTrader: (2)
 
LOU's Avatar
 
Join Date: Feb 2004
Location: NOR*CAL
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by diwun67
I know I'm a nobody and all but who is this Alex and what does he drive?
This is Alex's tricked out ride.
Old 10-10-2006, 04:06 PM
  #14  
diwun67
Registered User
iTrader: (13)
 
diwun67's Avatar
 
Join Date: Jun 2005
Location: In the wrong lane
Posts: 6,433
Likes: 0
Received 0 Likes on 0 Posts
Default

Old 10-10-2006, 04:20 PM
  #15  
zman1910
Registered User
iTrader: (3)
 
zman1910's Avatar
 
Join Date: Jan 2005
Location: NY
Posts: 1,895
Likes: 0
Received 0 Likes on 0 Posts
Default

8:1....yikes, get it retuned thats a bit too rich for my tastes

So in actuality you weren't really running 500whp on the stock block then
Old 10-10-2006, 05:35 PM
  #16  
Nitrouz
Back to Z
iTrader: (27)
 
Nitrouz's Avatar
 
Join Date: Dec 2004
Location: West Coast
Posts: 6,626
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by diwun67
I know I'm a nobody and all but who is this Alex and what does he drive?
No one really knows who Alex is. He's like this bat out of hell. Appears out of nowhere, snatches your lunch money, and runs off on his 500whp bicycle.

Alex

Last edited by Nitrouz; 10-10-2006 at 05:37 PM.
Old 10-10-2006, 06:03 PM
  #17  
bigbri
Registered User
Thread Starter
 
bigbri's Avatar
 
Join Date: Apr 2005
Location: CALI
Posts: 2,059
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by zman1910
8:1....yikes, get it retuned thats a bit too rich for my tastes

So in actuality you weren't really running 500whp on the stock block then
True....
Old 10-10-2006, 07:15 PM
  #18  
atar350
Registered User
 
atar350's Avatar
 
Join Date: Jan 2005
Location: Sactown, California
Posts: 2,331
Likes: 0
Received 0 Likes on 0 Posts
Default

I dunno about that, wait till you get your numbers on 23 lbs of boost and a good tune, Teds dyno was off, but it cant be THAT far off, if he said high 600's, and your 23lbs of boost dyno says like 630-650rwhp on Robs, then we know what you were around, your car on meth had to have at least 480-520rwhp that **** was craaaazy. What was the best trap on that setup, I forget?

I wanna go to Robs and re-dyno myself, but **** at this rate I am gonna have like 268rwhp.
Old 10-12-2006, 06:07 PM
  #19  
eNdLess1
Registered User
 
eNdLess1's Avatar
 
Join Date: Dec 2005
Location: California
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

Those are excellent numbers, regardless. Anything over 350hp is fine by any standards. I wouldnt get so down. Its just numbers.


Originally Posted by bigbri
We'll as we all know I've had all my Z work done at SP and am very happy with my car..But as everyone knows Sp's dyno reads high and I had no clue on my dyno numbers I was told "low 700 high 600 WHEEL HP" I tursted the person that built my car and was happy the way it ran..Well a coulple of weeks ago my car felt differrent and my car was running different...Like the tune changed on me...Then I couldn't rev the motor past 3500rpms due to limp mode because my flywheel was coming apart and setting off a check enging code of crank angle sensor...So I took my car to z car to get the clutch and flywheel changed so I could drive my car normal again and decided to see "the real #'s" I know my car is fast and never thought it had 700whp but guesstamated low 600whp....The highest I trapped was 134mph on a cold night boosting 23lbs witch is a good indication of low to mid 600whp..Well it was a warm day and we dynoed my car...Ready for the numbers???...........570whp and 540wtq In my cars defense it was hot, my a/f is FUKING rich 10.1 to 8.1 and the car was only boosting 18lbs boost as opposed to the 23lbs it boosts on the street.......Anyways I just wanted you all to know..Also ZCAR GARAGE is the BEST shop I've ever been to Rob is a cool *** guy and the Guys working on the cars are baddass and know there ****...The first time I every met Rob he gives me one of his own personal cars for a "loaner" car to drive back up to sac while my car was being worked on.... I wish I would of gone there from the start....So anyone with Z needs around NOR CAL go to Z car garage.....I have some plans for my z and have about 100+ more wheel hp coming soon....
Old 10-12-2006, 09:37 PM
  #20  
ZON
Registered User
iTrader: (2)
 
ZON's Avatar
 
Join Date: May 2002
Location: norcal
Posts: 2,059
Likes: 0
Received 0 Likes on 0 Posts
Default

I heard Marin was selling his Z. Is it because his SP dyno #'s are bullsh!t too? Like I guess so are mine, hahaha....


Quick Reply: Went to Z car and found out the truth....



All times are GMT -8. The time now is 06:10 PM.