350z in a sandrail
02-14-2006, 12:29 PM
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: ca
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
350z in a sandrail
Check this out i just got finished with this project
I ended up with 410WHP @6400rpm @9.9 psi boost And 357WTQ , I got the VVT set advanced at 1700rpm to 4000 rpm then they advance for the top end ,
I loaded it at 2800 rpm and played with the VVT , i got 280WTQ
Running a Haltech E11.v2 EMS
http://www.glamisdunes.com/invision/...8191_thumb.jpg
I ended up with 410WHP @6400rpm @9.9 psi boost And 357WTQ , I got the VVT set advanced at 1700rpm to 4000 rpm then they advance for the top end ,
I loaded it at 2800 rpm and played with the VVT , i got 280WTQ
Running a Haltech E11.v2 EMS
http://www.glamisdunes.com/invision/...8191_thumb.jpg
02-14-2006, 12:31 PM
#2
Registered User
iTrader: (1)
Join Date: Feb 2006
Location: Greenbrier, Arkansas
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Chris @ Danzio
Check this out i just got finished with this project
I ended up with 410WHP @6400rpm @9.9 psi boost And 357WTQ , I got the VVT set advanced at 1700rpm to 4000 rpm then they advance for the top end ,
I loaded it at 2800 rpm and played with the VVT , i got 280WTQ
Running a Haltech E11.v2 EMS
http://www.glamisdunes.com/invision/...8191_thumb.jpg
I ended up with 410WHP @6400rpm @9.9 psi boost And 357WTQ , I got the VVT set advanced at 1700rpm to 4000 rpm then they advance for the top end ,
I loaded it at 2800 rpm and played with the VVT , i got 280WTQ
Running a Haltech E11.v2 EMS
http://www.glamisdunes.com/invision/...8191_thumb.jpg
02-14-2006, 12:40 PM
#5
Registered User
iTrader: (10)
Join Date: Apr 2005
Location: Performance LAND
Posts: 1,731
Likes: 0
Received 0 Likes
on
0 Posts
Nice i had a SR20 in a 2 Seater Long travel. Very light and fly dune to dune with ease. Ive dabbled with the idea of running a vq35de but like the power the northstar motors give
Trending Topics
02-14-2006, 05:31 PM
#11
Registered User
Thread Starter
Join Date: Dec 2005
Location: ca
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
02-15-2006, 06:16 AM
#14
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sins4u33
i saw a 2jz-gte in a sandrail before :-p absolutely amazing guys i love it
02-15-2006, 09:05 AM
#17
Originally Posted by sq40
I have always wanted to build a sand rail (But eqip it for the mountains/woods).. What does a typical build cost now adays?
how does the saying go, "if you need to ask it prolly is too much" lol. about the cheapest you will get away with on a decent kit would be 10-15k. they can sky rocket towards 100k pretty quickly after that.
02-15-2006, 09:09 AM
#18
Originally Posted by overZealous1
how does the saying go, "if you need to ask it prolly is too much" lol. about the cheapest you will get away with on a decent kit would be 10-15k. they can sky rocket towards 100k pretty quickly after that.
15K is tolorable.. 100k is way out of my range though..
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
