RPM signal with Zeitronix
11-10-2005, 02:58 AM
#1
Registered User
Thread Starter
Join Date: Jul 2005
Location: Across the Pond United Kingdom
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
RPM signal with Zeitronix
Have ZT-2 running with AFR, EGT, Boost and lambda where do i splice from to get the RPM signal (for connecting to Zt-2 green wire, pin #3).
I've seen a thread on this recently but can't find it now
Post any wiring diagrams you think might help
I've seen a thread on this recently but can't find it now
Post any wiring diagrams you think might help
11-10-2005, 04:52 AM
#2
Registered User
Join Date: Jul 2003
Location: Albuquerque, New Mexico
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
Check out this thread: http://g35driver.com/forums/showthread.php/t=40388 It has been a long time, but you might also go back and check some of my previous threads/post on Zeitronix. Looking through some notes I think it is terminal #62 Yellow/red wire on the ECU harness connector. That's assuming Nissan hasn't changed things.
11-10-2005, 07:29 AM
#5
Registered User
Thread Starter
Join Date: Jul 2005
Location: Across the Pond United Kingdom
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Thnx guys. Any issues splicing off that wire and thus changing the impedance of the circuit i.e. knock-on effects elsewhere.
Does the wire (on pin #62) have a particular name
Does the wire (on pin #62) have a particular name
Thread
Thread Starter
Forum
Replies
Last Post
MAsSIVrOOM
Engine & Drivetrain
2
10-20-2023 10:50 AM
etkms
Engine & Drivetrain
29
06-19-2022 06:30 PM
Justin100
Intake Exhaust
26
11-29-2015 03:58 PM
hardwood66
Maintenance & Repair
0
09-08-2015 04:31 AM
